Ryan Yao

 1. Install the AppDownload the ComMarker App from the official source. Tips:  You can download from: Laser Engraving Software Download ComMarker If prompted, agree to the security check, then comp...

 ⚠Please make sure before engraving: Follow the user manual to install ComMarker Studio and connect the engraver to your computer.Remove the lens cap.Power on the engraver. Note: To avoid interrupt...

⚠Please make sure before engraving: Follow the user manual to install ComMarker Studio and assemble the machine with the computer. Install the 70×70 field lens and select the corresponding lens set...

Plug the foot pedal onto the port. Go to Device Setting → Port → Marking input port and make sure the port is set to IN2.Note: If pressing the pedal still doesn’t respond after plug it in, try enab...

Download and install Lightburn software from the website. Note:  It is not compatible with our machine if your Lightburn version is lower than V1.3.01, please download a new version and reinstall. ...

Note: If you can not find your cor file or have any unexpected issues, please feel free to contact support@commarker.com. Please provide your machine model, SN code, and a description of the issue...

1. In case of engraving a big object, the supporting pole needs to be extended with a riser 2. Disassemble the supporting pole 3. Make sure the side with the threaded holes face upwards. 4. Fix the...

1. Install the driver Notes： Please conduct the following operation before installing the driver  1) The machine is on;  2) Keep the emergency button not pressed;  3) Data cable connected   1.1 Rig...

Plug the foot pedal onto the port. Go to Device Setting → Port → Marking input port and make sure the port is set to IN2. Note: If pressing the pedal still does not respond after plugging it in, en...

For MacOS Note:  It is not compatible with our machine if your Lightburn version is lower than V1.3.01, please download a new version and reinstall.  And Lightburn is a paid software with 1 month f...