Ryan Yao

1. Assemble the machine2. Connect the power cable 3.Connect the machine to the computer 4.Install the software 5.Check the field lens size 6.Verify the emergency stop button is in the released posi...

1.To maintain the inner shape of a design, use Draw to create a bridge. 2.Select both designs.  3.Click Boolean, then click Subtract Top. 4.This creates a bridge to hold the inner shape for cutting. 

1. Open the software and click "About" in the Menu. 2. Check your version number in the pop-up window. Make sure it's not lower than v1.0.34.3. You can get the latest version of the software here:h...

Check if you have both rollers and slides plugged into the machine.Check the Rotary or Slide connection. The connector on the accessory must be on the left side of the machine (the red Emergency St...

⚠Please make sure before engraving: Follow the user manual to install ComMarker Studio and connect the engraver to your computer.Remove the lens cap.Power on the engraver. Note: To avoid interrupti...

⚠Please make sure before engraving: Follow the user manual to install ComMarker Studio and assemble the machine with the computer.Remove the lens cap.Power on the engraver. 1.Set up ComMarker COX i...

⚠Please make sure before engraving: Follow the user manual to install ComMarker Studio and assemble the machine with the computer.Mount the Slide Extension onto the engraving bed. Remove the lens c...

⚠Please make sure before engraving: Follow the user manual to install ComMarker Studio and assemble the machine with the computer. Fix the rotary axis onto the platform and connect it to the correc...