Slide Extension Engraving with ComMarker COX

⚠Please make sure before engraving: 

Follow the user manual to install ComMarker Studio and assemble the machine with the computer.

Mount the Slide Extension onto the engraving bed. 

Remove the lens cap. 

Power on the engraver.

1.Mount the Slide Extension onto the engraving bed connect it with the laser engraver. 

Note: The port of your slide extension must be placed on the left.

2.Set up ComMarker COX in ComMarker Studio and verify lens selection

Troubleshooting: If unsuccessful, please refer to the "Preparation Before Engraving" section to complete the startup check.

3.Place and secure the workpiece, ensuring the left red dot is on the workpiece.

4.Click “Focusˮ to preform focusing.

Troubleshooting: If focusing failed, please refer to the "Focus Readjust Needed with ComMarker Studio" section for detailed diagnosis and solutions.

5.Select “Extension Modeˮ. Use “Textˮ、“Drawˮ or other function on the left to import your design.

Note：

If you import an image, your design will appear on the left of the canvas. Resize the canvas to find your design.

6.Move and resize your design to where and how you want it to be engraved.

7.Import the engraving settings based on your material.

Sample settings for wood photos

Note：

If the settings panel does not appear, select the design from the Graphics list to activate it.

8. Click Preview. The slide extension will move, and when it reach the engraving area, the right red dot will start scanning to show the engraving area and shape. You can move your work piece or stop the preview and adjust the design until it locates on the ideal position.

Tips:

	If the “Preview Contourˮ is Clicked, preview will show the outline of the processing objects.	If the “Preview Contourˮ is Unclicked, preview will show the rectangle border of the processing objects.
Text
Vector
Photo

9.Once the preview is confirmed. Click “Startˮ to begin engraving.