Operating B6 with Lightburn

For MacOS

Note: 

It is not compatible with our machine if your Lightburn version is lower than V1.3.01, please download a new version and reinstall. 

And Lightburn is a paid software with 1 month free trial, you need to buy the licence key for Pro version.

1. Downloadand install Lightburn software from the website

 https://lightburnsoftware.com/pages/trial-version-try-before-you-buy

2.Find downloaded file LightburnV1.3.01, and drag Lightburn icon to the Applications folder

3.Copy the folder “EZCAD for ComMarker B6” from the USB to the desktop

4. A device window will pop out if the software is open the first time, click “Create Manually”, Select “JCZFiber”

Note: 

Make sure the machine is on and connected via USB

5. Import EZCAD Config and select the folder

6.Select folder “EZCAD for ComMarker B6”→“ Plug”, and choose “markcfg7” and click “next”

7.You can see the following window if everything goes right, and click "next" 

8. Change the name if necessary, and input the right X and Y Axis Length according to the lens. Click "next"

9. Click “finish” and it will in the device list

10. The status will change into “Ready” when the machine is on and connected via USB

11. Go to “Basic Settings” from “Device setting” button, click “Load COR file”, Select “EZCAD for ComMarker B6”, Choose file “JCZ15.cor”, Click “OK”

12. Change the setting of Freq “Min 20”, “Max 200”. Switch on “Galvo 2”. And it is ready to control the machine with Lightburn.

For Window system

Refer to the operation on MacOS, please don’t forget to install the driver when installing Lightburn software as the following picture shows:

For more instructions and specifications, View Full ComMarker B6 Manual↗