(Optional) B6 MOPA Assembly of Auxiliary Riser

1. In case of engraving a big object, the supporting pole needs to be extended with a riser

2. Disassemble the supporting pole

3. Make sure the side with the threaded holes face upwards.

4. Fix the riser on the base board.

5. Connect the riser with the original pole with screws

6. The laser head is raised with enough focus length for bigger objects

Note: 

It takes about 1 second of pressing the switch button before the machine starts to run

For more instructions and specifications, View Full ComMarker B6 MOPA Manual↗