ComMarker App Setup and Basic Engraving Operation (Android)

1. Install the App

1. Download the ComMarker App from the official source.

Tips: 

You can download from: Laser Engraving Software Download ComMarker

2. If prompted, agree to the security check, then complete the installation.

2. Connect Your Phone to the Machine

1. Turn on the Wi-Fi function on your phone.

2. Find the network named “ComMarker_XXXX” (the suffix may vary).

3. Enter the password commarker to connect.

3. Connect the App to the Device

1. Open the ComMarker App.Read the connection tips and tap OK.

2. Tap the four-square icon at the top right corner.

3. Select Device Connection.

4. Allow the app to access location when prompted.The app will automatically detect your machine and display a message confirming that the device parameters have been successfully synchronized.

Note: 

Keep your phone connected to the ComMarker Wi-Fi network during the entire process.

4. Start a New Engraving Project

1. Tap Create to begin a new engraving.

2. Select Text to add your content.

3. Adjust the font style, size, and layout as desired.

4. Tap Process Settings, then enter your engraving parameters.

   

5. Tap OK, and then Next to continue.

5. Prepare for Engraving

1. Place your material on the work platform.

2. Tap Focus to perform auto-focusing.

3. Tap Preview to check the engraving size and position.

   If adjustment is needed, tap the back arrow to modify your design.

6. Start Engraving

Once you have confirmed the preview area:

1. Tap Processing to start engraving.

2. Wait for the process to complete.

7. Finish Up

After engraving:

Tap Back Home to return to the main interface.

Or tap Return to go back to your current project.