Ryan Yao

Physical Operation (Rotary A) 1. Connect the machine with the rotary chuck A as follow, and place the rotary on the work table 2. Clamp the cylinder object by using the anticlockwise mode, or suppo...

Rotary ConnectionConnect the machine with the rotary as follow picture.RollerChuck  Engraving operation1. Input text after clicking the button "A".OR, import a vector file. 2. Move the word to Page...

1. In case of engraving a big object, the supporting pole needs to be extended with a riser 2. Disassemble the supporting pole 3. Make sure the side with the threaded holes face upwards. 4. Fix the...

 Physical Operation (Rotary A) 1. Connect the machine with the rotary chuck A as follow, and place the rotary on the work table 2. Clamp the cylinder object by using the anticlockwise mode, or supp...

⚠Please make sure before engraving: Follow the user manual to install ComMarker Studio and assemble the machine with the computer.Remove the lens cap.Power on the engraver. 1.Place and secure the m...

Download and install Lightburn software from the website  Note:  It is not compatible with our machine if your Lightburn version is lower than V1.3.01, please download a new version and reinstall....

Please follow the steps for debugging. 1. Place the stainless steel test plate on the machine table 2. Lift up or down the laser head to the best focus point according to the number in handwriting ...

Download and install Lightburn software from the website  Note:  It is not compatible with our machine if your Lightburn version is lower than V1.3.01, please download a new version and reinstall....

1. Install the software Note:  It is recommended to copy and paste the files of the USB drive to the computer desktop or other computer disks.  For windows:1) Open the folder “ComMarker Softwareˮ a...

⚠Please make sure before engraving: Follow the user manual to install ComMarker Studio and assemble the machine with the computer.Remove the lens cap.Power on the engraver. 1.Set up ComMarker COX i...