B4 MOPA Instruction for Rotary Device

Physical Operation (Rotary A)

1. Connect the machine with the rotary chuck A as follow, and place the rotary on the work table

2. Clamp the cylinder object by using the anticlockwise mode, or support a ring by using clockwise mode.

3. Lift up or down to change the angle of the rotary chuck if necessary

Physical Operation (Rotary B)

1. Connect the machine with the rotary chuck B , and place the rotary with right angle as follow

2. Clamp the cylinder object by using the positive mode or negative mode as it shows

3. Place the rotary chuck, elevating it with a support if necessary for the machine to mark at the right focus point

Physical Operation (Rotary C)

1. Connect the machine with the rotary chuck C

2. Place the cylinder object on the roller

For more instructions and specifications, View Full ComMarker B4 MOPA Manual↗