⚠Please make sure before engraving:
Follow the user manual to install ComMarker Studio and assemble the machine with the computer.
Remove the lens cap.
Power on the engraver.
1.Place and secure the material on the work platform.
Ensure the red sensor dot lands on the surface of the material.
2. Click the “Focus” button in the bottom-right corner of the interface to start autofocus.
Note：
If your material is transparent, place a piece of paper on the engraving area so that the red dot lands on the paper surface.
Then perform the focusing operation.
3. Click “Image” from the left panel and import the image you want to engrave.
4. Input engraving settings based on Appendix 1.
One pass is usually enough.
Note：
If the settings panel does not appear, select the design from the Graphics list to activate it.
5. Click Preview and place the preview helper on the material to confirm the path and position.
Adjust the image size and location until it's fully located on the material.
Tips:
If the “Preview Contourˮ is Clicked, preview will show the path of the processing objects. If the “Preview Contourˮ is Unclicked, preview will show the rectangle border of the processing objects.
6. Once the preview is confirmed, remove the preview helper and close the safety door.
Click Start to begin engraving.
7. After engraving, open the safety door and remove the material to check the result.
Tips：
If the engraving result is unsatisfactory, you can adjust “Contrastˮ, “Brightnessˮ and set “DPIˮ (higher DPI for more detail, lower DPI to save time) in the “Picture Attributesˮ panel on the right to improve overall clarity.
You can also click “Adjust Imageˮ for basic image editing.
Appendix 1: Recommended settings for different materials
| OMNI 5W PARAMETER-150mm lens | ||||||||
| Material Category | Material | Passes |
Speed/ Dwell Time |
Freq (KHz) | Pulse-Width | Interval | Note | |
|
Glass/ Ceramics |
Glass Engraving | 1 | 200 | 40 | 1 | 0.03 | ||
| Glass Deep Engraving/Matte Glass | 1 | 1600 | 40 | 2 | 0.02 | |||
| Ceramic | 2 | 500 | 40 | 1 | 0.03 | |||
| Metal | Aluminum Engraving | 1 | 1000 | 40 | 1 | 0.03 | ||
| Aluminum Photos | 1 | 400 us | 40 | 10 | DPI:400 | image mode: Halftone | nagetive image | |
| Brass Engraving | 1 | 500 | 40 | 1 | 0.03 | |||
| Brass (Deep Brown) | 1 | 100 | 30 | 5 | 0.015 | |||
| Brass Photos | 1 | 400 us | 40 | 1 | DPI:400 | image mode: Halftone | ||
| Stainless Steel Engraving | 1 | 1000 | 40 | 1 | 0.03 | |||
| Stainless Steel Photos | 1 | 400 us | 40 | 5 | DPI:400 | image mode: Halftone | nagetive image | |
| Stainless Steel(Brown) | 1 | 300 | 30 | 1 | 0.03 | |||
| Stainless Steel Photo(Brown) | 1 | 500 us | 40 | 1 | DPI:1000 | image mode: Halftone | ||
| Stainless Steel(Black) | 1 | 10 | 40 | 1 | 0.01 | Defocus 10mm | ||
| Mirror Stainless Steel Engraving | 1 | 1000 | 40 | 1 | 0.03 | |||
| Mirror Stainless Steel Photos | 1 | 500 us | 40 | 10 | DPI:400 | image mode: Halftone | nagetive image | |
| Painted Metal Engraving | 1 | 1000 | 40 | 1 | 0.03 | |||
| Painted Metal Photos | 1 | 500 us | 40 | 12 | DPI:400 | image mode: Halftone | ||
| Tumblers | White Coated Tumblers（Remove Coat） | 3 | 750 | 40 | 1 | 0.015 | Defocus 10mm | |
| Black Coated Tumblers（Remove Coat） | 2 | 800 | 50 | 1 | 0.01 | Defocus 10mm | ||
| Black Coated Tumblers（Brown/Gold） | 3 | 350 | 30 | 1 | 0.03 | Defocus 10mm | ||
| Acrylic | Black Acrylic Engraving | 1 | 1000 | 40 | 1 | 0.03 | ||
| Black Acrylic Photos | 1 | 500 us | 40 | 12 | DPI:400 | nagetive image | ||
| Transparent Acrylic Engraving | 1 | 500 | 40 | 1 | 0.03 | |||
| Transparent Acrylic Photos | 1 | 400 us | 40 | 1 | DPI:400 | image mode: Halftone | ||
| Transparent Acrylic Lamp Base | 2 | 250 | 30 | 1 | 0.03 | |||
| Colorful Acrylic Engraving | 1 | 800 | 30 | 3 | 0.03 | |||
| Colorful Acrylic Photos | 1 | 500 us | 40 | 5 | DPI:500 | image mode: Halftone | ||
| Plastic/Silcone | PC/ABS | 1 | 1000 | 40 | 15 | 0.03 | ||
| Nylon | 1 | 2000 | 40 | 10 | 0.1 | |||
| TPU | 1 | 600 | 40 | 1 | 0.025 | |||
| PET/PI（PET Film） | 1 | 2200 | 30 | 1 | 0.03 | |||
| PVC | 1 | 1000 | 30 | 10 | 0.1 | |||
| Self-adhesive labels | 1 | 1000 | 30 | 10 | 0.1 | |||
| Silicone | 1 | 600 | 40 | 1 | 0.025 | |||
| Rubber | 1 | 1500 | 30 | 5 | 0.03 | |||
| Wood | Wood Engraving | 2 | 1000 | 40 | 5 | 0.03 | ||
| Wood Photos | 1 | 200 us | 40 | 1 | DPI:850 | image mode: Halftone | nagetive image | |
| Wood Dark Color | 1 | 100 | 40 | 5 | 0.03 | |||
| Wood--Walnut | 1 | 200 | 40 | 1 | 0.02 | |||
| Bamboo | 1 | 200 | 30 | 3 | 0.02 | |||
| Cork Coasters Engraving | 1 | 800 | 40 | 5 | 0.03 | |||
| Cork Coasters (Deep Engraving) |
1 | 300 | 40 | 1 | 0.03 | |||
| Cork Coasters Photos | 1 | 400 us | 40 | 5 | DPI:1250 | image mode: Halftone | ||
| Fabric | Leather Marking | 1 | 1000 | 30 | 20 | 0.03 | ||
| Leather(Black Marking) | 2 | 750 | 40 | 1 | 0.03 | |||
| Black Leather(White) | 1 | 3000 | 35 | 15 | 0.03 | |||
| Silk | 1 | 1000 | 40 | 15 | 0.03 | |||
| Jean | 1 | 1000 | 40 | 7 | 0.03 | |||
| Towels | 1 | 2500 | 30 | 17 | 0.03 | |||
| Cutting Felt | 3 | 200 | 40 | 1 | ||||
| Black cotton T-shirt | 1 | 1000 | 40 | 7 | 0.03 | |||
| Electronic Products |
Phone Cases（TPU） | 1 | 600 | 40 | 1 | 0.025 | ||
| Charger Adaptor | 1 | 1000 | 40 | 15 | 0.03 | |||
| PCB Marking | 1 | 1000 | 40 | 15 | 0.03 | |||
| USB | 1 | 1000 | 40 | 15 | 0.03 | |||
| Food | Orange | 2 | 1000 | 40 | 1 | 0.03 | ||
| Apple | 1 | 1200 | 40 | 1 | 0.02 | |||
| Banana | 1 | 700 | 40 | 1 | 0.03 | |||
| Macarons | 3 | 400 | 30 | 1 | 0.05 | |||
| Egg | 1 | 1000 | 40 | 1 | 0.03 | |||
| Chocolate | 1 | 1500 | 30 | 5 | 0.03 | |||
| Biscuit | 1 | 1200 | 30 | 5 | 0.03 | |||
| Sport Products | Baseball | 1 | 1000 | 30 | 15 | 0.03 | ||
| Table Tennis Ball | 1 | 1500 | 30 | 8 | 0.03 | |||
| Golf Ball | 1 | 700 | 40 | 20 | 0.03 | |||
| Stone/Slate | Slate Marking(Grey) | 1 | 1000 | 40 | 1 | 0.03 | ||
| Slate Marking（White） | 1 | 100 | 40 | 1 | 0.05 | defocus 15mm | ||
| Stone Marking | 9 | 500 | 40 | 1 | 0.03 | |||
| Stone deep Engraving | 256 | 500 | 40 | 1 | 0.03 | 4mm depth | ||
| Paper | Paper Marking | 1 | 1000 | 30 | 5 | 0.03 | ||
| Paper Photos | 3 | 400 us | 40 | 1 | DPI:650 | image mode: Halftone | ||
| Others | Leaf Photos | 1 | 200 us | 40 | 1 | DPI:850 | image mode: Halftone | nagetive image |
| Black Carbon Fiber Marking | 1 | 1500 | 40 | 15 | 0.03 | defocus 10mm | ||
| OMNI 5W PARAMETER--70mm lens | ||||||||
| Material Category | Material | Passes | Speed/Dwell Time | Freq (KHz) | Pulse-Width | Interval | Note | |
| Glass/Ceramics | Glass Engraving | 1 | 400 | 40 | 1 | 0.02 | ||
| Glass Deep Engraving/Matte Glass | 1 | 3200 | 40 | 2 | 0.01 | |||
| Ceramic | 2 | 1000 | 40 | 1 | 0.02 | |||
| Metal | Aluminum Engraving | 1 | 2000 | 40 | 1 | 0.02 | ||
| Aluminum Photos | 1 | 100 us | 40 | 12 | DPI:850 | image mode: Halftone | nagetive image | |
| Brass Engraving | 1 | 1000 | 40 | 1 | 0.02 | |||
| Brass (Deep Brown) | 1 | 200 | 30 | 6 | 0.01 | |||
| Brass Photos | 1 | 100 us | 40 | 1 | DPI:850 | image mode: Halftone | ||
| Stainless Steel Engraving | 1 | 2000 | 40 | 1 | 0.02 | |||
| Stainless Steel Photos | 1 | 100 us | 40 | 6 | DPI:850 | image mode: Halftone | nagetive image | |
| Stainless Steel(Brown) | 1 | 600 | 30 | 1 | 0.02 | |||
| Stainless Steel Photo(Brown) | 1 | 500 us | 40 | 1 | DPI:2550 | image mode: Halftone | ||
| Stainless Steel(Black) | 1 | 20 | 40 | 1 | 0.01 | Defocus 10mm | ||
| Mirror Stainless Steel Engraving | 1 | 2000 | 40 | 1 | 0.02 | |||
| Mirror Stainless Steel Photos | 1 | 400 us | 40 | 12 | DPI:850 | image mode: Halftone | nagetive image | |
| Painted Metal Engraving | 1 | 2000 | 40 | 1 | 0.02 | |||
| Painted Metal Photos | 1 | 400 us | 40 | 14 | DPI:850 | image mode: Halftone | ||
| Tumblers | White Coated Tumblers（Remove Coat） | 3 | 1500 | 40 | 1 | 0.01 | Defocus 10mm | |
| Black Coated Tumblers（Remove Coat） | 2 | 1600 | 50 | 1 | 0.01 | Defocus 10mm | ||
| Black Coated Tumblers（Brown/Gold） | 3 | 700 | 30 | 1 | 0.02 | Defocus 10mm | ||
| Acrylic | Black Acrylic Engraving | 1 | 2000 | 40 | 1 | 0.02 | ||
| Black Acrylic Photos | 1 | 400 us | 40 | 14 | DPI:850 | nagetive image | ||
| Transparent Acrylic Engraving | 1 | 1000 | 40 | 1 | 0.02 | |||
| Transparent Acrylic Photos | 1 | 400 us | 40 | 1 | DPI:850 | image mode: Halftone | ||
| Transparent Acrylic Lamp Base | 2 | 500 | 30 | 1 | 0.02 | |||
| Colorful Acrylic Engraving | 1 | 1600 | 30 | 4 | 0.02 | |||
| Colorful Acrylic Photos | 1 | 500 us | 40 | 6 | DPI:850 | image mode: Halftone | ||
| Plastic/Silcone | PC/ABS | 1 | 2000 | 40 | 18 | 0.02 | ||
| Nylon | 1 | 4000 | 40 | 12 | 0.05 | |||
| TPU | 1 | 1200 | 40 | 1 | 0.01 | |||
| PET/PI（PET Film） | 1 | 4400 | 30 | 1 | 0.02 | |||
| PVC | 1 | 2000 | 30 | 12 | 0.06 | |||
| Self-adhesive labels | 1 | 2000 | 30 | 12 | 0.06 | |||
| Silicone | 1 | 1200 | 40 | 1 | 0.01 | |||
| Rubber | 1 | 3000 | 30 | 6 | 0.02 | |||
| Wood | Wood Engraving | 2 | 2000 | 40 | 6 | 0.02 | ||
| Wood Photos | 1 | 100 us | 40 | 1 | DPI:1250 | image mode: Halftone | nagetive image | |
| Wood Dark Color | 1 | 200 | 40 | 6 | 0.02 | |||
| Wood--Walnut | 1 | 400 | 40 | 1 | 0.01 | |||
| Bamboo | 1 | 400 | 30 | 4 | 0.01 | |||
| Cork Coasters Engraving | 1 | 1600 | 40 | 6 | 0.02 | |||
| Cork Coasters (Deep Engraving) |
1 | 600 | 40 | 1 | 0.02 | |||
| Cork Coasters Photos | 1 | 300 us | 40 | 6 | DPI:2550 | image mode: Halftone | ||
| Fabric | Leather Marking | 1 | 2000 | 30 | 24 | 0.02 | ||
| Leather(Black Marking) | 2 | 1500 | 40 | 1 | 0.02 | |||
| Black Leather(White) | 1 | 6000 | 35 | 18 | 0.02 | |||
| Silk | 1 | 2000 | 40 | 18 | 0.02 | |||
| Jean | 1 | 2000 | 40 | 8 | 0.02 | |||
| Towels | 1 | 5000 | 30 | 20 | 0.02 | |||
| Cutting Felt | 3 | 400 | 40 | 1 | ||||
| Black cotton T-shirt | 1 | 2000 | 40 | 8 | 0.02 | |||
| Electronic Products |
Phone Cases（TPU） | 1 | 1200 | 40 | 1 | 0.01 | ||
| Charger Adaptor | 1 | 2000 | 40 | 18 | 0.02 | |||
| PCB Marking | 1 | 2000 | 40 | 18 | 0.02 | |||
| USB | 1 | 2000 | 40 | 18 | 0.02 | |||
| Food | Orange | 2 | 2000 | 40 | 1 | 0.02 | ||
| Apple | 1 | 2400 | 40 | 1 | 0.01 | |||
| Banana | 1 | 1400 | 40 | 1 | 0.02 | |||
| Macarons | 3 | 800 | 30 | 1 | 0.03 | |||
| Egg | 1 | 2000 | 40 | 1 | 0.02 | |||
| Chocolate | 1 | 3000 | 30 | 6 | 0.02 | |||
| Biscuit | 1 | 2400 | 30 | 6 | 0.02 | |||
| Sport Products | Baseball | 1 | 2000 | 30 | 18 | 0.02 | ||
| Table Tennis Ball | 1 | 3000 | 30 | 10 | 0.02 | |||
| Golf Ball | 1 | 1400 | 40 | 24 | 0.02 | |||
| Stone/Slate | Slate Marking(Grey) | 1 | 2000 | 40 | 1 | 0.02 | ||
| Slate Marking（White） | 1 | 200 | 40 | 1 | 0.03 | defocus 15mm | ||
| Slate 3D Engraving | 120 | 1400 | 40 | 1 | 0.02 | |||
| Stone Marking | 9 | 1000 | 40 | 1 | 0.02 | |||
| Stone deep Engraving | 256 | 1000 | 40 | 1 | 0.02 | 4mm depth | ||
| Paper | Paper Marking | 1 | 2000 | 30 | 6 | 0.02 | ||
| Paper Photos | 3 | 300 us | 40 | 1 | DPI:1250 | image mode: Halftone | ||
| Others | Leaf Photos | 1 | 100 us | 40 | 1 | DPI:1250 | image mode: Halftone | nagetive image |
| Black Carbon Fiber Marking | 1 | 3000 | 40 | 18 | 0.02 | defocus 10mm | ||
For more operational guide and specifications, View Full ComMarker Omni X Operation Tutorial↗
Comments
0 comments
Please sign in to leave a comment.