Download and install Lightburn software from the website
Note:
It is not compatible with our machine if your Lightburn version is lower than V1.3.01, please download a new version and reinstall. And Lightburn is a paid software with 1 month free trial, you need to buy the licence key for Galvo version.
1. Download the software from the website:
2. Find downloaded file Lightburn V1.7.01, and drag Lightburn icon to the Applications folder
3. Copy the folder “Titan 1” from the USB drive to the desktop
4. A device window will pop out if the software is open the first time, click “Create Manually”, Select “JCZFiber”
Note:
Make sure the machine is on and connected
5. Import EZCAD Config and select the folder
6. Select folder “EZCAD for Titan 1”---->“ Plug”, and choose “markcfg7” and click “next”
7. You can see the following window, Fiber and click “next”.
8. Change the name if necessary, and input the right X and Y Axis Length according to the lens. Click “next”
9. Click “finish” and it will in the device list
10. The status will change into “Ready” when the machine is on and connected via USB
11. Go to “Basic Settings” from “Device setting” button, click “Load COR file”, Select “Titan 1”, Choose file “JCZ11.cor”, Click “OK”.
12. Change the setting of Freq “Min 1”, “Max 4000”. Switch on “Galvo 2”. Set the Laser Type Fiber, and it is ready to control the machine with LightBurn.
For more instructions and specifications, View Full ComMarker Titan Manual↗
Comments
0 comments
Please sign in to leave a comment.