Metal Cover Handles Hard to Install for Omni X

Typical Symptom:
The handles on both sides of the metal cover are very difficult to install or cannot be fully inserted into the slots.

Possible Cause:
The handle and slot dimensions are tightly fitted, requiring additional force for installation.

Steps to Resolve:

1. Align the handle with the empty slot on the metal cover.

2. Use your fist to firmly strike the handle until it is fully inserted into the slot.

3. Check that both handles are securely installed and stable.

Note: If you are unable to fit the handles even after applying firm pressure, do not use tools that could damage the housing.

If the issue persists, please contact Support@commarker.com and provide:

• Your SN code

• Your order number

• A short video showing the issue

Our technical team will review your case and provide a customized solution.