Omni X Maintenance

1.Maintenance Overview

NOTE: 

All adjustments and maintenance must be performed with the power turned off and the power supply disconnected, unless otherwise stated. Only qualified technicians are permitted to modify or disassemble this equipment.

2. Regular Maintenance Procedures

• Maintain a clean, dust-free work environment at all times.
• Always ensure complete power shutdown when the device is not in operation.
• Cover the galvanometric lens when it is not in use.
• Clean the work surface after each use with 75% or higher concentration isopropyl alcohol wipes.
• Prohibited cleaning methods include: abrasive cleaners, corrosive chemicals, aerosol sprays, or any liquid quantity that could penetrate electrical components. All surfaces must be completely dry before reactivation.
• When vacuuming ventilation ports, only use the minimum suction setting to prevent internal component damage.

NOTE: 

Operators are strictly prohibited from performing any additional servicing or component replacement.