⚠Please make sure before engraving: 

Follow the user manual to install ComMarker Studio and assemble the machine with the computer.

Remove the lens cap.

Power on the engraver.

1.Set up ComMarker COX in ComMarker Studio and verify lens selection.

Troubleshooting: If unsuccessful, please refer to the "Preparation Before Engraving" section to complete the startup check.

2. Place a metal business card on the engraving bed and ensure the left red dot lands on the surface.

3.Click the “Focusˮ button to set the autofocus. Once focusing is complete, a confirmation window will appear.

Troubleshooting: If focusing failed, please refer to the "Focus Readjust Needed with ComMarker Studio" section for detailed diagnosis and solutions.

4.Click on “Textˮ then click the canvas.

Tips: You can Click “Fillˮ in the top-right corner to convert the text into a solid-filled engraving.

5.Input the engraving setting.

Note: If the settings panel does not appear, select the design from the Graphics list to activate it.

6.Click “Preview“ to check the engraving area.

Tips:

If the “Preview Contourˮ is Clicked, preview will show the outline of the processing objects.	If the “Preview Contourˮ is Unclicked, preview will show the rectangle border of the processing objects.

7.You can move the text on the canvas to change the engraving spot and size. Once the preview is confirmed. Click "Stop" to exit

8.Click “Startˮ to begin engraving.