⚠Please make sure before engraving:
Follow the user manual to install ComMarker Studio and assemble the machine with the computer.
Remove the lens cap.
Power on the engraver.
1. Secure the material firmly on the platform to prevent jamming or curling during cutting. Ensure the red sensor dot lands on the surface of the material.
Note:
To protect your device, please place a backing board beneath it before focusing. The board should be flat and opaque. You may also purchase compatible Cutting Panel or a Metal Sheet Holder available at https://commarker.com.
2. Click the “Focus” button in the bottom-right corner of the interface to start autofocus.
Note：
If your material is transparent, place a piece of paper on the engraving area so that the red dot lands on the paper surface. Then perform the focusing operation.
3. Use “Drawˮ or “Vectorˮ or “Textˮ to import your design.
Note：
Fill needs to be disabled
4. Input engraving settings based on Appendix 1.
Note：
If the settings panel does not appear, select the design from the Graphics list to activate it.
Note：
If you are unsure about the thickness or the appropriate number of cutting passes, select "Continuous" . The machine will keep engraving continuously.
⚠ Please monitor the process and turn off the machine manually when the cutting is achieved.
5. Click Preview. Place the preview helper on the material to verify position and path.
Tips:
If the “Preview Contour” is Clicked, preview will show the outline of the processing objects. If the “Preview Contour” is Unclicked, preview will show the rectangle border of the processing objects.
6. Once the preview is confirmed, remove the preview helper. Click Start (F2) to begin cutting.
Note：
Please ensure you are wearing protective glasses while the laser is operating!
7. After cutting, wait for the laser to stop, then remove the workpiece and clean dirt from the platform
Note：
The workpiece may be hot after engraving. Please wear gloves or wait until it cools down before handling.
Appendix 1: Recommended settings for different materials
| OMNI 5W PARAMETER-150mm lens | ||||||||
| Material Category | Material | Passes | Speed/Dwell Time | Freq (KHz) | Pulse-Width | Interval | Note | |
| Glass/Ceramics | Glass Engraving | 1 | 200 | 40 | 1 | 0.03 | ||
| Glass Deep Engraving/Matte Glass | 1 | 1600 | 40 | 2 | 0.02 | |||
| Glass Cutting(0.3mm) | 50 | 100 | 40 | 1 | ||||
| Ceramic | 2 | 500 | 40 | 1 | 0.03 | |||
| Metal | Aluminum Engraving | 1 | 1000 | 40 | 1 | 0.03 | ||
| Aluminum Photos | 1 | 400 us | 40 | 10 | DPI:400 | image mode: Halftone | nagetive image | |
| Aluminum Cutting (0.5mm) | 12 | 5 | 40 | 1 | ||||
| Brass Engraving | 1 | 500 | 40 | 1 | 0.03 | |||
| Brass (Deep Brown) | 1 | 100 | 30 | 5 | 0.015 | |||
| Brass Photos | 1 | 400 us | 40 | 1 | DPI:400 | image mode: Halftone | ||
| Stainless Steel Engraving | 1 | 1000 | 40 | 1 | 0.03 | |||
| Stainless Steel Photos | 1 | 400 us | 40 | 5 | DPI:400 | image mode: Halftone | nagetive image | |
| Stainless Steel(Brown) | 1 | 300 | 30 | 1 | 0.03 | |||
| Stainless Steel Photo(Brown) | 1 | 500 us | 40 | 1 | DPI:1000 | image mode: Halftone | ||
| Stainless Steel(Black) | 1 | 10 | 40 | 1 | 0.01 | Defocus 10mm | ||
| Mirror Stainless Steel Engraving | 1 | 1000 | 40 | 1 | 0.03 | |||
| Mirror Stainless Steel Photos | 1 | 500 us | 40 | 10 | DPI:400 | image mode: Halftone | nagetive image | |
| Painted Metal Engraving | 1 | 1000 | 40 | 1 | 0.03 | |||
| Painted Metal Photos | 1 | 500 us | 40 | 12 | DPI:400 | image mode: Halftone | ||
| Tumblers | White Coated Tumblers（Remove Coat） | 3 | 750 | 40 | 1 | 0.015 | Defocus 10mm | |
| Black Coated Tumblers（Remove Coat） | 2 | 800 | 50 | 1 | 0.01 | Defocus 10mm | ||
| Black Coated Tumblers（Brown/Gold） | 3 | 350 | 30 | 1 | 0.03 | Defocus 10mm | ||
| Acrylic | Black Acrylic Engraving | 1 | 1000 | 40 | 1 | 0.03 | ||
| Black Acrylic Photos | 1 | 500 us | 40 | 12 | DPI:400 | nagetive image | ||
| Black Acrylic Cutting(3mm) | 6 | 5 | 40 | 1 | ||||
| Transparent Acrylic Engraving | 1 | 500 | 40 | 1 | 0.03 | |||
| Transparent Acrylic Photos | 1 | 400 us | 40 | 1 | DPI:400 | image mode: Halftone | ||
| Transparent Acrylic Lamp Base | 2 | 250 | 30 | 1 | 0.03 | |||
| Colorful Acrylic Engraving | 1 | 800 | 30 | 3 | 0.03 | |||
| Colorful Acrylic Photos | 1 | 500 us | 40 | 5 | DPI:500 | image mode: Halftone | ||
| Colorful Acrylic Cutting(3mm) | 55 | 150 | 30 | 1 | ||||
| Plastic/Silcone | PC/ABS | 1 | 1000 | 40 | 15 | 0.03 | ||
| PC Plstic Cutting（0.5mm） | 5 | 100 | 40 | 1 | ||||
| Nylon | 1 | 2000 | 40 | 10 | 0.1 | |||
| TPU | 1 | 600 | 40 | 1 | 0.025 | |||
| PET/PI（PET Film） | 1 | 2200 | 30 | 1 | 0.03 | |||
| PVC | 1 | 1000 | 30 | 10 | 0.1 | |||
| Self-adhesive labels | 1 | 1000 | 30 | 10 | 0.1 | |||
| Silicone | 1 | 600 | 40 | 1 | 0.025 | |||
| Rubber | 1 | 1500 | 30 | 5 | 0.03 | |||
| Wood | Wood Engraving | 2 | 1000 | 40 | 5 | 0.03 | ||
| Wood Photos | 1 | 200 us | 40 | 1 | DPI:850 | image mode: Halftone | nagetive image | |
| Wood Dark Color | 1 | 100 | 40 | 5 | 0.03 | |||
| Cutting Plywood(3mm) | 15 | 40 | 40 | 1 | ||||
| Wood (3D Engraving) | depends on the depth | 500 | 40 | 1 | 0.03 | |||
| Wood--Walnut | 1 | 200 | 40 | 1 | 0.02 | |||
| Bamboo | 1 | 200 | 30 | 3 | 0.02 | |||
| Cork Coasters Engraving | 1 | 800 | 40 | 5 | 0.03 | |||
| Cork Coasters (Deep Engraving) |
1 | 300 | 40 | 1 | 0.03 | |||
| Cork Coasters Photos | 1 | 400 us | 40 | 5 | DPI:1250 | image mode: Halftone | ||
| Fabric | Leather Marking | 1 | 1000 | 30 | 20 | 0.03 | ||
| Leather(Black Marking) | 2 | 750 | 40 | 1 | 0.03 | |||
| Black Leather(White) | 1 | 3000 | 35 | 15 | 0.03 | |||
| Silk | 1 | 1000 | 40 | 15 | 0.03 | |||
| Jean | 1 | 1000 | 40 | 7 | 0.03 | |||
| Towels | 1 | 2500 | 30 | 17 | 0.03 | |||
| Cutting Felt | 3 | 200 | 40 | 1 | ||||
| Black cotton T-shirt | 1 | 1000 | 40 | 7 | 0.03 | |||
| Electronic Products |
Phone Cases（TPU） | 1 | 600 | 40 | 1 | 0.025 | ||
| Charger Adaptor | 1 | 1000 | 40 | 15 | 0.03 | |||
| PCB Marking | 1 | 1000 | 40 | 15 | 0.03 | |||
| USB | 1 | 1000 | 40 | 15 | 0.03 | |||
| Food | Orange | 2 | 1000 | 40 | 1 | 0.03 | ||
| Apple | 1 | 1200 | 40 | 1 | 0.02 | |||
| Banana | 1 | 700 | 40 | 1 | 0.03 | |||
| Macarons | 3 | 400 | 30 | 1 | 0.05 | |||
| Egg | 1 | 1000 | 40 | 1 | 0.03 | |||
| Chocolate | 1 | 1500 | 30 | 5 | 0.03 | |||
| Biscuit | 1 | 1200 | 30 | 5 | 0.03 | |||
| Sport Products | Baseball | 1 | 1000 | 30 | 15 | 0.03 | ||
| Table Tennis Ball | 1 | 1500 | 30 | 8 | 0.03 | |||
| Golf Ball | 1 | 700 | 40 | 20 | 0.03 | |||
| Stone/Slate | Slate Marking(Grey) | 1 | 1000 | 40 | 1 | 0.03 | ||
| Slate Marking（White） | 1 | 100 | 40 | 1 | 0.05 | defocus 15mm | ||
| Slate 3D Engraving | 120 | 700 | 40 | 1 | 0.03 | |||
| Stone Marking | 9 | 500 | 40 | 1 | 0.03 | |||
| Stone deep Engraving | 256 | 500 | 40 | 1 | 0.03 | 4mm depth | ||
| Paper | Paper Marking | 1 | 1000 | 30 | 5 | 0.03 | ||
| Paper Cutting | 2 | 100 | 40 | 1 | ||||
| Paper Photos | 3 | 400 us | 40 | 1 | DPI:650 | image mode: Halftone | ||
| Others | Leaf Photos | 1 | 200 us | 40 | 1 | DPI:850 | image mode: Halftone | nagetive image |
| Black Carbon Fiber Marking | 1 | 1500 | 40 | 15 | 0.03 | defocus 10mm | ||
| Carbon Fiber Cutting (0.2mm) | 4 | 100 | 40 | 1 | ||||
| OMNI 5W PARAMETER--70mm lens | ||||||||
| Material Category | Material | Passes | Speed/Dwell Time | Freq (KHz) | Pulse-Width | Interval | Note | |
| 3D crystal | 800 | 40 | 12 | |||||
| Glass/Ceramics | Glass Engraving | 1 | 400 | 40 | 1 | 0.02 | ||
| Glass Deep Engraving/Matte Glass | 1 | 3200 | 40 | 2 | 0.01 | |||
| Glass Cutting(0.3mm) | 50 | 200 | 40 | 1 | ||||
| Ceramic | 2 | 1000 | 40 | 1 | 0.02 | |||
| Metal | Aluminum Engraving | 1 | 2000 | 40 | 1 | 0.02 | ||
| Aluminum Photos | 1 | 100 us | 40 | 12 | DPI:850 | image mode: Halftone | nagetive image | |
| Aluminum Cutting (0.5mm) | 12 | 10 | 40 | 1 | ||||
| Brass Engraving | 1 | 1000 | 40 | 1 | 0.02 | |||
| Brass (Deep Brown) | 1 | 200 | 30 | 6 | 0.01 | |||
| Brass Photos | 1 | 100 us | 40 | 1 | DPI:850 | image mode: Halftone | ||
| Stainless Steel Engraving | 1 | 2000 | 40 | 1 | 0.02 | |||
| Stainless Steel Photos | 1 | 100 us | 40 | 6 | DPI:850 | image mode: Halftone | nagetive image | |
| Stainless Steel(Brown) | 1 | 600 | 30 | 1 | 0.02 | |||
| Stainless Steel Photo(Brown) | 1 | 500 us | 40 | 1 | DPI:2550 | image mode: Halftone | ||
| Stainless Steel(Black) | 1 | 20 | 40 | 1 | 0.01 | Defocus 10mm | ||
| Mirror Stainless Steel Engraving | 1 | 2000 | 40 | 1 | 0.02 | |||
| Mirror Stainless Steel Photos | 1 | 400 us | 40 | 12 | DPI:850 | image mode: Halftone | nagetive image | |
| Painted Metal Engraving | 1 | 2000 | 40 | 1 | 0.02 | |||
| Painted Metal Photos | 1 | 400 us | 40 | 14 | DPI:850 | image mode: Halftone | ||
| Tumblers | White Coated Tumblers（Remove Coat） | 3 | 1500 | 40 | 1 | 0.01 | Defocus 10mm | |
| Black Coated Tumblers（Remove Coat） | 2 | 1600 | 50 | 1 | 0.01 | Defocus 10mm | ||
| Black Coated Tumblers（Brown/Gold） | 3 | 700 | 30 | 1 | 0.02 | Defocus 10mm | ||
| Acrylic | Black Acrylic Engraving | 1 | 2000 | 40 | 1 | 0.02 | ||
| Black Acrylic Photos | 1 | 400 us | 40 | 14 | DPI:850 | nagetive image | ||
| Black Acrylic Cutting(3mm) | 6 | 10 | 40 | 1 | ||||
| Transparent Acrylic Engraving | 1 | 1000 | 40 | 1 | 0.02 | |||
| Transparent Acrylic Photos | 1 | 400 us | 40 | 1 | DPI:850 | image mode: Halftone | ||
| Transparent Acrylic Lamp Base | 2 | 500 | 30 | 1 | 0.02 | |||
| Colorful Acrylic Engraving | 1 | 1600 | 30 | 4 | 0.02 | |||
| Colorful Acrylic Photos | 1 | 500 us | 40 | 6 | DPI:850 | image mode: Halftone | ||
| Colorful Acrylic Cutting(3mm) | 55 | 300 | 30 | 1 | ||||
| Plastic/Silcone | PC/ABS | 1 | 2000 | 40 | 18 | 0.02 | ||
| PC Plstic Cutting（0.5mm） | 5 | 200 | 40 | 1 | ||||
| Nylon | 1 | 4000 | 40 | 12 | 0.05 | |||
| TPU | 1 | 1200 | 40 | 1 | 0.01 | |||
| PET/PI（PET Film） | 1 | 4400 | 30 | 1 | 0.02 | |||
| PVC | 1 | 2000 | 30 | 12 | 0.06 | |||
| Self-adhesive labels | 1 | 2000 | 30 | 12 | 0.06 | |||
| Silicone | 1 | 1200 | 40 | 1 | 0.01 | |||
| Rubber | 1 | 3000 | 30 | 6 | 0.02 | |||
| Wood | Wood Engraving | 2 | 2000 | 40 | 6 | 0.02 | ||
| Wood Photos | 1 | 100 us | 40 | 1 | DPI:1250 | image mode: Halftone | nagetive image | |
| Wood Dark Color | 1 | 200 | 40 | 6 | 0.02 | |||
| Cutting Plywood(3mm) | 15 | 80 | 40 | 1 | ||||
| Wood (3D Engraving) | depends on the depth | 1000 | 40 | 1 | 0.02 | |||
| Wood--Walnut | 1 | 400 | 40 | 1 | 0.01 | |||
| Bamboo | 1 | 400 | 30 | 4 | 0.01 | |||
| Cork Coasters Engraving | 1 | 1600 | 40 | 6 | 0.02 | |||
| Cork Coasters (Deep Engraving) |
1 | 600 | 40 | 1 | 0.02 | |||
| Cork Coasters Photos | 1 | 300 us | 40 | 6 | DPI:2550 | image mode: Halftone | ||
| Fabric | Leather Marking | 1 | 2000 | 30 | 24 | 0.02 | ||
| Leather(Black Marking) | 2 | 1500 | 40 | 1 | 0.02 | |||
| Black Leather(White) | 1 | 6000 | 35 | 18 | 0.02 | |||
| Silk | 1 | 2000 | 40 | 18 | 0.02 | |||
| Jean | 1 | 2000 | 40 | 8 | 0.02 | |||
| Towels | 1 | 5000 | 30 | 20 | 0.02 | |||
| Cutting Felt | 3 | 400 | 40 | 1 | ||||
| Black cotton T-shirt | 1 | 2000 | 40 | 8 | 0.02 | |||
| Electronic Products |
Phone Cases（TPU） | 1 | 1200 | 40 | 1 | 0.01 | ||
| Charger Adaptor | 1 | 2000 | 40 | 18 | 0.02 | |||
| PCB Marking | 1 | 2000 | 40 | 18 | 0.02 | |||
| USB | 1 | 2000 | 40 | 18 | 0.02 | |||
| Food | Orange | 2 | 2000 | 40 | 1 | 0.02 | ||
| Apple | 1 | 2400 | 40 | 1 | 0.01 | |||
| Banana | 1 | 1400 | 40 | 1 | 0.02 | |||
| Macarons | 3 | 800 | 30 | 1 | 0.03 | |||
| Egg | 1 | 2000 | 40 | 1 | 0.02 | |||
| Chocolate | 1 | 3000 | 30 | 6 | 0.02 | |||
| Biscuit | 1 | 2400 | 30 | 6 | 0.02 | |||
| Sport Products | Baseball | 1 | 2000 | 30 | 18 | 0.02 | ||
| Table Tennis Ball | 1 | 3000 | 30 | 10 | 0.02 | |||
| Golf Ball | 1 | 1400 | 40 | 24 | 0.02 | |||
| Stone/Slate | Slate Marking(Grey) | 1 | 2000 | 40 | 1 | 0.02 | ||
| Slate Marking（White） | 1 | 200 | 40 | 1 | 0.03 | defocus 15mm | ||
| Slate 3D Engraving | 120 | 1400 | 40 | 1 | 0.02 | |||
| Stone Marking | 9 | 1000 | 40 | 1 | 0.02 | |||
| Stone deep Engraving | 256 | 1000 | 40 | 1 | 0.02 | 4mm depth | ||
| Paper | Paper Marking | 1 | 2000 | 30 | 6 | 0.02 | ||
| Paper Cutting | 2 | 200 | 40 | 1 | ||||
| Paper Photos | 3 | 300 us | 40 | 1 | DPI:1250 | image mode: Halftone | ||
| Others | Leaf Photos | 1 | 100 us | 40 | 1 | DPI:1250 | image mode: Halftone | nagetive image |
| Black Carbon Fiber Marking | 1 | 3000 | 40 | 18 | 0.02 | defocus 10mm | ||
| Carbon Fiber Cutting (0.2mm) | 4 | 200 | 40 | 1 | ||||
Comments
0 comments
Please sign in to leave a comment.