Assembly of Omni XE

Product Structure

List of items

Assembly of Machine

1. Fix the laser column onto the work base.

      (4 pcs M8×10 pan head screws)

2. Install the laser head bracket to the column.

   （4 pcs M5×12 pan head screws）

3. Secure the laser source onto the bracket.

  （4 pcs M5×8 pan head screws）

4. Connect the cables to the rear ports of the laser source.

   (Including: laser power cable, laser data cable, sensor cable and galvanometer cable.)

5. Connect the lift motor cable.

6.Connect the data and power cables. The machine is now ready for use.

NOTE：

Verify the emergency stop button is in the released position. If engaged, rotate clockwise to reset.

Emergency stop switch: 

 

In case of emergency, press the emergency stop switch immediately to power off the machine.

Ensure the emergency condition is fully resolved. Rotate the emergency stop switch to the reset position.