Safety Warning
NOTE:
Before using the laser engraving machine, please read this safety guide carefully.
- Do not leave the device unattended while in operation. Ensure it is functioning properly at all times.
- Check the machine for damage every time before you use it. Do not operate it in any way when any damage or defect is found.
- Ensure the workspace is clean and level.
- Do not disassemble or alter the machine's structure without authorization. Do not modify or compile its operating system.
- Keep the interior of the machine clean. Accumulated residues and debris from cutting and engraving can be hazardous and may cause a fire. Regularly clean the work area to remove chips and residues.
1. Laser Safety
- The machine uses Class IV lasers (safety door must be functional and closed for Class I operation), which are extremely powerful and can cause eye injuries or burn the skin. It is recommended to wear laser safety goggles when operating the laser engraver.
- Avoid direct exposure of your skin to Class IV laser beams, especially at close range.
- Teenagers must be supervised by a parent or guardian while using the machine.
- Do not touch the laser engraving beam while it is active.
2. Material Safety
- Do not engrave materials with unknown properties.
- Recommended materials for engraving include:
- Metals: stainless steel, aluminum, bronze, brass, alloys, etc.
- Plastics: PP, PE, ABS, etc.
- Non-metals: wood, leather, paperboard, etc.
3. Use Safety
- Do not point the laser at people, animals, or any combustible objects, whether the device is active or not.
- Operate this laser engraving device in compliance with all applicable local and national laws and regulations.
- Use the device strictly in accordance with this instruction manual and the engraving software manual.
- Ensure that any untrained personnel near the device are informed of its dangers before operation.
4. Electric Safety
- Use this device only with a compatible and stable power supply, ensuring voltage fluctuations are less than 5%.
- Ensure the device is properly grounded before turning on the power.
- Keep the area around the laser engraver dry, well-ventilated, and maintain an ambient temperature between 10°C~28°C. The ambient humidity should not exceed 70%.
NOTE:
The machine operates best at 10°C-28°C. Temperatures outside this range may cause the laser to stop working.
Comments
0 comments
Please sign in to leave a comment.