Assembly of B6 MOPA

List of items

Product Structure

Specifications

Assembly of Machine

1. Place the parts on the table

2. Fix the supporting shelf onto the supporting pole

3. Put the laser head on the supporting shelf and fasten the screws to fix the laser head

4. Fasten the supporting pole with the screws

5. Put the split machine on the table. The machine can be used at this state.

6. It can also be assembled as an integrated machine with screws

Note: 

1) Adjusting the focus is a necessary prerequisite for laser engraving, please press the “Auto” button or manually move the laser head to adjust focus after placing the engraving material 

2) Make sure to remove the plastic protective cover of the field lens before engraving to avoid damage to the field lens caused by laser burning.

For more instructions and specifications, View Full ComMarker B6 MOPA Manual↗