Appendix 2: How to do a Material Test

⚠Please make sure before engraving: 

Follow the user manual to install ComMarker Studio and assemble the machine with the computer.

Remove the lens cap.

Power on the engraver.

1.Draw a shape using the “Drawˮ function. Click Fill.

2.Click “Arrayˮ in the top-left corner and Select “Material Test Arrayˮ from the dropdown menu.

Note：

If your material is transparent, place a piece of paper on the engraving area so that the red dot lands on the paper surface. Then perform the focusing operation.

3. In the pop-up window, set the parameter combinations you want to test, along with number of Row × Number of columns. Click “Confirmˮ to generate the Material Test Array.

4. Place the preview helper on the material, then click “Previewˮ to check the engraving area.

Tips:

If the “Preview Contour” is Clicked, preview will show the outline of the processing objects.	If the “Preview Contour” is Unclicked, preview will show the rectangle border of the processing objects.

5. If the engraving area exceeds the materialʼs surface, select all elements in the array and resize them. Continue adjusting until the preview fits properly within your material area.

6. Once the preview is confirmed, remove the preview helper and close the safety door. Then click “Start (F2)ˮ to start the engraving process.

7. After the engraving is complete, remove the material and check the results.

a. Choose the result that best meets your expectations. 

b. The settings used for that result are the optimal settings for your selected material and can be used to achieve the best engraving quality.

For more operational guide and specifications, View Full ComMarker Omni X Operation Tutorial↗